12 VOLT AUDIO AMPLIFIER IC TDA7222AP CIRCUIT DIAGRAM

12 VOLT AUDIO AMPLIFIER IC TDA7222AP CIRCUIT DIAGRAM



Note



Use 12V DC for powering the circuit.

The IC must be heatsinked.

Speaker can be a 4 ohms one.

For optimum performance input and output must be separately grounded.



Pin Name Description

1 Vcc Supply Voltage

2 RR Ripple Reject

3 MC Muting control

4 OP AF Signal Input

5 FB FB Filter

6 GA Gain adjust

7 GND Ground

8 GND Ground

9 OP AF Output

10 BS BootStrap

Read More..

12 volt Cellar Drain Pump

This circuit lets you control a pump, to keep the level of water in a cellar below a certain threshold, for example. Power  is supplied to the pump by a battery that is recharged auto matically when the AC power line voltage is present.

12-volt Cellar Drain Pump Circuit diagram :

lf the water  level  rises, the electrodes touch the liquid and a current begins to flow. The transistor then conducts and the pump runs. The pump stops when the water level has dropped sufficiently for the electrodes to no longer be in contact with it but not straight away, as the voltage on the transistor gate is maintained for a few seconds more by the 470 ytF capacitor. This makes it possible to ensure  the electrodes are completely clear of the water.

The battery is constantly tested by the comparator circuit around the T1071 lC.  lts output drives the  gate of the triac  in the transformer primary circuit via the optoisolator. The transformer secondary charges the battery via the rectifier,  using as little power as possible, and in this way keeps the battery at 13.2 V.

Source : http://www.ecircuitslab.com/2012/07/12-volt-cellar-drain-pump.html 

Read More..